中部槽焊接預熱

Preheating for middle groove plate welding

1.產品概述與使用方法：Product overview and usage ：

中部槽板需要承載著礦石或煤炭從礦坑底部運到地面，所以槽板和幫板的焊接必須牢固且耐沖擊。我們設計并制造了雙排火焰加熱平臺，專門針對中部槽的槽板和幫板焊前預熱。直排多火口加熱炬的方向可以調節，兩排加熱炬之間的距離可以調節，完美地滿足了不同尺寸中部槽焊接的要求。多火口交叉排布，使火焰有效覆蓋在焊縫兩邊，保證焊縫及周圍受熱均勻，防止焊接過程中氫致裂紋產生，保證焊接工藝的實施，也就保證了焊接質量。加熱平臺配備了PLC操控系統，可以由操作人員一鍵啟動，也可與自動焊接生產線匹配使用。

The middle groove plates need to carry ore or coal from the pit bottom to the ground, so the welding of the groove plates and the edge plates must be strong and impact resistant. We design and manufacture a double-row flame heating platform specifically for preheating the grooved and edge plates. The direction of the inline multi-nozzle heating torch can be adjusted, and the distance between the two rows can be adjusted, which perfectly meets the requirements of middle groove welding with different sizes. Multi-nozzle cross-arrangement can have the flame effectively covering both sides of the welding seam, to ensure that the welding seam and its surroundings are evenly heated up, to prevent hydrogen cracks, to ensure the implementation of the welding process, and to ensure the quality of welding. The heating platform is equipped with a PLC control system, which supports one click on. This system also could be used in conjunction with the automatic welding production line.

? 天然氣與壓縮空氣混合燃燒，可加熱到300℃以上，提高加熱速率。

Natural gas and compressed air mixed up, heated up to 300℃, efficient heating rate.

? 可以保證燃燒充分，經濟實惠。

Can ensure full combustion, economic benefits.

主要技術參數：Main technical parameters